Door Installation in West Park - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across West Park

Door installation in West Park costs $1,200 to $4,800 for a standard replacement entry door, and $2,500 to $7,500 when you step up to an impact-rated hurricane door with a Florida Product Approval. Most jobs in West Park run higher than nearby Miramar or Hollywood because nearly every permitted replacement here triggers HVHZ wind-load requirements, not a simple slab swap. That’s the honest reality, and we’ve been working inside it since 2011. Call (727) 483-7883 and Ed Winslow or one of our West Park crew leads will walk you through exactly what your home needs before you spend a dollar.

Call (727) 483-7883

West Park’s housing stock is specific. Rows of single-story CBS tract homes built between the late 1940s and the mid-1970s, most with original door openings framed for 32-inch hollow-core slabs. Those openings were never designed for the wind pressures Broward County now enforces. We know that because we’re out here in West Park every week, pulling old louvered doors off Miami Gardens Drive ranches and Hallandale Beach Boulevard blocks, and rebuilding the openings to code. This is our Door Installation team’s home turf.

Key Takeaways

• Expect $1,200 to $4,800 for a standard West Park entry door replacement, more for impact-rated units.
• Every permitted door replacement in West Park must meet HVHZ design pressure requirements, usually ±50 PSF minimum.
• Free in-home measure and written quote. Call (727) 483-7883.
• Permanent $40 off any repair over $200, plus a 10% discount for seniors and veterans on every job.

Why Winslow Windows & Doors Is West Park’s Preferred Door Installation Company

Ed Winslow has been running this company since 2011. That’s 15 years of answering the phone personally, standing behind crews in West Park, and refusing to walk away from a job until the building inspector signs off. We’re not a national chain. We have a published address, a license number anyone can look up, and a Done Right Promise: if it’s not done right, we come back and make it right. A hundred years of accountability is the standard, because Ed’s name is on the door, and on every job we do.

West Park homeowners call us for a reason. They’ve dealt with installers who show up late, drop a new slab into a 1965 wood buck with drywall screws, and vanish when the jamb tears out in the first tropical storm. Our crews are background-checked, uniformed, and trained specifically on HVHZ door replacements. A live person answers our phone 24/7. No call centers. No voicemail loops. You call at 2 a.m. during a storm watch, Ed or a team lead picks up.

Scheduling for West Park runs through our South Florida office in Miami, but the crews work locally in West Park and know the neighborhoods: the Miami Gardens Drive corridor, the blocks east of State Road 7 near Carver Ranches, the homes off Southwest 40th Avenue near McTyre Park. We know which houses still have original jalousie side-lites. We know the Citizens Insurance inspection flags. That local knowledge means our quotes reflect what code actually requires here, not a guess.

Our Door Installation Services in West Park

Hurricane-Proof Front & Entry Doors

This is the job we do most often in West Park, and the one where code compliance matters most. A hurricane-rated entry door here must carry a Florida Product Approval and meet a minimum design pressure of ±50 PSF, which means full jamb and buck replacement, not a slab swap. We install impact-rated doors with laminated glass interlayers, stainless steel hinges, and pressure-treated bucks anchored to carry ±60 PSF or higher. Every unit we quote in West Park carries a Miami-Dade NOA or Florida Product Approval number specific to its configuration. We never install a door that can’t pass a Broward County wind mitigation inspection.

Replacement Doors

West Park’s original doors are almost universally hollow-core and 32 inches wide, with louvered panels or thin glass inserts. They were energy-inefficient when they were installed in 1962, and they’re dangerous now. Replacement in West Park isn’t just picking a new style. The opening has to be measured against wind-load tables, the existing buck inspected for rot or termite damage, and the permit pulled before any work starts. We handle all of that, and we give you a written line-item quote before you sign anything.

Entry Doors

Whether you’re on Southwest 25th Street near West Park’s eastern edge or up by the county line, your front door takes the brunt of South Florida weather and afternoon sun. We install entry doors from Therma-Tru and ES Windows, including West Park Custom & Geometric Windows, both authorized brands for Winslow, with composite frames that resist the salt-laden air that eats through steel jamb corners faster in West Park than almost anywhere else in Broward. No hollow fillers, no foam-core knockoffs. Solid construction, proper weatherstripping, and a threshold that actually seals.

Storm & Exterior Doors

Storm doors in West Park serve double duty: added ventilation during the wet season and a sacrificial layer against wind-driven rain. But a storm door is not a substitute for an impact-rated primary door. If you leave a non-rated primary door in place and add only a storm door, your insurer will still flag the opening. We’ll tell you that straight before we sell you anything. We stock storm and exterior door components for West Park customers so turnaround stays fast once your units arrive.

Trusted Brands We Service in West Park

We’re authorized installers for Therma-Tru, ES Windows, and ECO Window Systems, and we service those brands’ doors across West Park. We’re also experienced with Cgi in West Park products. Therma-Tru fiberglass impact doors are the workhorse for Broward HVHZ replacements because they carry Florida Product Approvals in dozens of configurations and hold paint better than steel in this climate. ES Windows gives West Park homeowners a cleaner sightline on modern-entry designs, and we match frames to existing architectural lines on the older CBS ranches. We stock common replacement parts locally for these brands, so if a hinge, sweep, or latch fails down the road, we’re not ordering from a warehouse in Ohio and making you wait two weeks.

Common Door Installation Problems We See in West Park Homes

• Original 1960s wood bucks failing under wind load. The old jamb was nailed to the CBS opening with 3-inch common nails. When a new impact door goes in and the wind pushes against it, the entire assembly can tear out. We rebuild every buck with pressure-treated lumber and stainless anchors before the door goes in.
• Jalousie side-lites left intact beside a new impact door. The main slab gets upgraded, but the louvered glass panels on either side remain non-rated. The opening still fails large-missile testing, and the insurer refuses the wind-mitigation credit. We always recommend addressing the full opening, not just the slab.
• Corroded steel jambs from salt-laden air. West Park sits close enough to the Atlantic and Biscayne Bay corridor that airborne salt accelerates oxidation on original aluminum frames and steel jambs. We regularly find jambs with holes rusted through at the threshold, which means the door was sealing against nothing.
• Non-Florida-Product-Approved doors installed cheaper. A big-box steel door with a basic glass insert might be $400 cheaper up front. It shatters on first impact, the permit gets voided, and the building official orders a re-inspection. In West Park’s HVHZ, that cheap door ends up costing triple.

Pricing for Door Installation in West Park, FL

What Door Installation Costs in West Park

Impact-rated entry doors in West Park typically run $2,500 to $7,500 installed. Large or custom openings with side-lites or transoms push to $5,000 to $12,000 or more. Whole-home packages covering every exterior door, including garage and patio, range from $8,000 to $25,000, depending on opening count and glazing configuration. What moves the price in West Park specifically: the required design pressure rating for your opening (±50 PSF is the floor in most of the city, but some elevations need higher), the condition of the existing buck, whether the opening includes non-rated side-lites that have to be replaced, and how many doors you’re doing at once. Frame material matters too: fiberglass costs more than steel but resists salt corrosion far better in this climate. We’ll walk your home with you, measure every opening, and give you a written quote with no change orders after the fact. Call (727) 483-7883 to schedule the measure, free.

Florida Pays You Back

West Park homeowners can stack several incentives on an impact door replacement. My Safe Florida Home matching grants offer up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated doors that carry the required product approvals. Florida’s sales tax exemption applies to impact-resistant windows and doors, so you skip the state sales tax on qualifying units. There’s also the federal 25C energy credit, worth 30% of product cost up to $600 per year on qualifying doors. And once your wind mitigation inspection passes, most carriers apply a windstorm premium credit, typically around 25% on the windstorm portion of your premium. The inspection itself runs $75 to $150. These programs and carrier credits have specific requirements and change over time, so we won’t promise exact numbers. What we will do is document your door’s Florida Product Approval and design pressure rating so your wind mitigation inspector has everything they need. Compare that to impact-rated hurricane shutters: they’re a good supplement, but permanent impact doors protect you every hour of every day without panels to hang in a storm warning.

Local Code, Local Wind, Local Paperwork

Here’s what a compliant West Park door replacement actually includes. First, a Florida Product Approval for the exact door configuration being installed. Not “similar to.” The exact size, glazing, and hardware. Second, a design pressure rating matched to the opening’s wind zone, with ±50 PSF as the practical floor for front entries in West Park and higher for side-wall or exposed openings. Third, a Broward County permit pulled by the contractor, with inspection scheduling handled by the contractor, not you. Fourth, full jamb and buck replacement if the existing framing is original 1960s wood. A cheap quote leaves out the permit, the buck rebuild, or the product approval documentation. That’s not a cheaper job. That’s an unpermitted liability with your name on it.

West Park’s true local challenge: the original CBS tract homes almost universally have door openings framed for 32-inch hollow-core doors with louvered panels. Because the entire city sits inside the HVHZ, every permitted entry door replacement must carry a Florida Product Approval and meet a minimum design pressure of ±50 PSF. That threshold forces full jamb and buck replacement, not a slab swap. That is not true just a few miles north in unincorporated Broward neighborhoods outside the HVHZ boundary. A door page written for Miramar or Hollywood doesn’t tell you that. This one does.

One recent job says it all. We replaced a corroded louvered entry door on a 1963 CBS ranch in the Miami Gardens Drive corridor after a Citizens inspection flagged it for wind-missile vulnerability. Our crew pulled the hollow-core slab and the original steel jamb, then set a Therma-Tru impact-rated fiberglass door with a laminated glass interlayer and stainless steel hinges. We rebuilt the buck with pressure-treated lumber and stainless anchors to carry a design pressure of ±60 PSF. The homeowner’s wind mitigation inspection passed the same week, unlocking the statutory discount on their next renewal. That’s the kind of documented compliance that matters when your insurer is reviewing the file.

And the unglamorous part matters too: many West Park homeowners in older blocks are receiving Citizens Insurance inspection flags or private-carrier non-renewal notices that cite jalousie or single-pane openings by name. The sales conversation here doesn’t start with curb appeal or energy savings. It starts with “your insurer is requiring this.” We’ve been through enough of those letters with West Park customers to know exactly what the carrier wants to see, and we document every job so the paper trail is clean.

Our Door Installation in West Park work follows the same standard on every street: Florida Product Approval documentation, permit pulled, inspection passed, and a written record you can hand to your insurer. No exceptions.

We Also Serve Cities Near West Park

We regularly work in West Park and surrounding communities, including Miami Shores, Hollywood, Fort Lauderdale, and Miami. If you’re a few blocks outside West Park’s city limits, call (727) 483-7883 and we’ll confirm coverage and schedule your free estimate.

FAQs - Door Installation in West Park

Get Your Free West Park Door Installation Estimate

If you live in West Park and you’re looking at a door replacement, start with a conversation, not a hard sell. Call (727) 483-7883 and you’ll reach a live person, any hour, any day. We’ll schedule a free in-home measure, walk your openings with you, and give you a written line-item quote that shows exactly what code requires and what it costs. Upfront pricing. No surprises on the invoice. The one down the road.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving West Park since 2011.