Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Roof Replacement & Installation in Miami Shores: What to Know First
Mr-Glass roof replacement and installation in Miami Shores typically runs between $8,500 and $22,000 depending on roof size, material choice, and whether we’re doing a full tear-off or an overlay. Most Mr-Glass roof systems we replace in Miami Shores take 3 to 5 working days from tear-off to final inspection, with permits pulled and inspections scheduled by our office before the first shingle comes off. We’re an independent Mr-Glass service provider, not a manufacturer-authorized dealer, which means we give you straight answers about what your roof actually needs without a brand sales quota hanging over the job.
Call (727) 483-7883 for a free estimate on Mr-Glass roof replacement in Miami Shores. Ed Winslow’s name is on every job we do.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass made its name in impact-rated windows and doors, but plenty of Miami Shores homes built since the early 2000s also have Mr-Glass roof systems, particularly on patio covers, carports, and sunroom transitions. Here’s what we actually see in the field:
- Glass-to-frame seal failure on Mr-Glass skylight transitions. The Mr-Glass GS-series skylight curb mounts use a butyl tape seal that breaks down after 10-14 years of South Florida UV exposure. Water sneaks in along the curb flashing, and by the time you see a ceiling stain, the decking underneath is already soft. We remove the old curb, replace any rotted decking, and re-flash with a double-layer ice-and-water barrier before reinstalling the glass unit.
- Corroded aluminum frames where Mr-Glass patio roofs meet the main roofline. Miami Shores sits close enough to Biscayne Bay that salt air works its way into the joint where a Mr-Glass aluminum patio cover ties into the shingle roof. The galvanic reaction between aluminum and fasteners causes pitting and eventual leaks. We pull the transition flashing, treat the frames, install isolation tape between dissimilar metals, and re-flash with code-compliant step flashing.
- Under-driven fasteners on Mr-Glass corrugated polycarbonate panels. The Mr-Glass ClearSpan series looks clean from below, but original installers often set screws too tight, cracking the panel around the washer. Hairline cracks widen in rain, and Miami Shores gets 60-plus inches a year. We replace cracked panels with OEM-equivalent Mr-Glass panels and set fasteners to the manufacturer’s torque spec, using EPDM washers that actually seat.
- Improper slope on flat Mr-Glass deck cover installations. We see a lot of Mr-Glass flat covers in Miami Shores backyards pitched at 1/4 inch per foot or less because the original installer didn’t account for the home’s settlement. Water ponds, algae grows, and eventually the seals give out. We re-pitch the structure during replacement, add a crick where needed, and make sure drainage moves away from the house.
- Worn flashing collars around Mr-Glass vent and pipe penetrations. This one isn’t unique to Mr-Glass, but Mr-Glass roof penetrations on older Miami Shores homes tend to use rubber boots that shrink and crack in the heat. We replace every penetration boot on a Mr-Glass replacement job, not just the one that leaked, because the rest are usually six months behind it.
Our Mr-Glass Roof Replacement & Installation Process
- 1
Call and talk to a person. No voicemail loop. You call (727) 483-7883, Ed or one of our office team picks up, and we schedule a walk-through at a time that works for you.
- 2
On-site evaluation. We inspect the existing Mr-Glass roof system, check decking condition from inside the attic where accessible, and photograph everything we find. You get a written line-item estimate with photos attached, not a number scrawled on a business card.
- 3
Material decision. We walk you through OEM Mr-Glass panels versus quality aftermarket equivalents, explaining where OEM matters for warranty continuity and where a comparable panel saves you 20-30% without sacrificing performance.
- 4
Permit and scheduling. We pull the permit for Miami Shores, schedule inspections, and set a start date. Your materials arrive the day before we start, not three weeks early sitting on your lawn.
- 5
Replacement and installation. Tear-off, decking repair, underlayment, new Mr-Glass-compatible roofing, flashing, and trim. Our crew protects your landscaping and runs a magnet sweep at the end of every day, every nail picked up, every time.
- 6
Final walk-through. Ed or a senior tech walks the roof with you, explains what changed, shows you the finished flashing and seals, and confirms the inspection passed. You get the Done Right Promise in writing.
What Mr-Glass Roof Replacement & Installation Costs in Miami Shores
Here’s the honest picture of Mr-Glass roof work in Miami Shores:
- Mr-Glass patio cover re-panel with structural repair: $3,200 - $6,800
- Mr-Glass skylight curb rebuild and re-flash: $900 - $2,400 per unit
- Full Mr-Glass roof system replacement on an attached sunroom or patio structure: $8,500 - $18,000
- Mr-Glass-to-main-roof transition re-flash (common leak point): $1,200 - $3,500
- Decking replacement under Mr-Glass sections (add-on, per 4×8 sheet): $85 - $140
What moves the price: number of penetrations, how much decking has to come out, access difficulty (second-story sunrooms in Miami Shores with tight side yards cost more), and whether you want OEM Mr-Glass panels or a quality equivalent. We’ll show you both options on the estimate. Call (727) 483-7883 for a free, written, line-item quote. No change orders once the job starts unless you ask for extra work.
Why Miami Shores Homeowners Call Winslow Windows & Doors for Mr-Glass Work
Most Mr-Glass products are impact-rated windows and doors, and that’s where we started. Ed Winslow learned the trade at Miami Dade College’s Wolfson Campus and has spent nearly three decades installing impact-rated systems across Miami-Dade. He grew up a few blocks from Barry University and still grabs coffee on NE 2nd Avenue, so when we say we know Miami Shores, we mean we know which blocks flood first and which homes have the original Mr-Glass kit from the mid-2000s.
We’re authorized installers for PGT, CGI, CWS, and ES Windows, so if your Mr-Glass roof work uncovers a window or door that also needs attention, we handle that in the same visit. Every technician is background-checked and uniformed. Live phone answer, 24/7. And the Done Right Promise means if it’s not right, we make it right. My name’s on it, so it’s going to be done right.
FAQs
Yes, if the damage is limited to flashing, a small section of panels, or one seal line, we can repair it. We’ll tell you honestly if a repair stretches 3 more years out of a system that’s already 15 years old, or if replacement is the better money. The $40 off any repair over $200 applies to Mr-Glass work, and estimates are always free.
Not for roof components, but it depends what Mr-Glass product you have. Glass units carry their own warranty from Mr-Glass, and we take care to match OEM specs so you don’t lose coverage. We’ll look at your paperwork during the estimate and tell you exactly what’s protected. Call (727) 483-7883 and bring your warranty docs.
OEM Mr-Glass panels take 2 to 3 weeks from order. Quality aftermarket equivalents, same profile and thickness, are often 3 to 5 days. We present both on the estimate with real numbers so you decide based on timeline and budget, not guesswork.
Yes, always. Miami Shores requires permits for structural roof work, and our office handles the application, the scheduling, and the inspection coordination. If a contractor says no permit needed for roof replacement, walk away. Call (727) 483-7883 for an exact quote on your Mr-Glass roof.
No. Our estimates are written and line-item, and we honor them. The only exception is if we open the roof and find decking damage we couldn’t see from the attic inspection, and we photograph that, show you before touching it, and get your sign-off on the additional sheets. No surprise invoices, ever.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami Shores and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After