CWS Custom & Geometric Windows Nationwide | Winslow Windows & Doors

CWS Custom & Geometric Windows in Miami Shores: What to Know First

We provide independent CWS custom and geometric window service throughout Miami Shores, and most repair or replacement jobs run from measurement to finish in two to three weeks, depending on the shape and glass package. A standard fix on a CWS radius unit in Miami Shores typically lands between $400 and $1,800, while a full custom replacement with impact glass can run $2,500 to $9,000 or more. If you’re reading this, you probably own a CWS window with a curve, an arch, or an unusual angle that a standard contractor won’t touch. We will. Call (727) 483-7883 for a straight answer and a free estimate.

Call (727) 483-7883

This page is for Miami Shores homeowners with CWS windows that break the mold: eyebrow arches over a front door, trapezoid transoms, radius-top picture windows, full-circle portholes, octagons, and oversized openings that need engineering, not just a tape measure. Ed Winslow has spent the better part of three decades installing and replacing windows across Miami-Dade, and Miami Shores has been home base the whole time. We know what these windows do in this climate, and we know how to fix them properly.

How CWS Products Fail - and How We Fix Them

CWS builds a solid product, but no window survives South Florida’s sun, salt air, and hurricane seasons without wearing down. On custom and geometric units, the failure modes get more specific than a standard square window. Here’s what we actually see on CWS jobs in Miami Shores:

• Radius and arch units losing their seal at the springline. CWS radius windows carry glass packages across a curved frame, and the sealant line where the curved glass meets the straight jamb is under constant thermal stress. After five to eight years of Miami Shores sun, that line can open and let condensation build inside the panes. We see it most on larger CWS arch tops over front entries. The fix is removing the sash, cleaning the glazing pocket, and re-bedding the unit with a marine-grade sealant, then re-installing with fresh setting blocks rated for curved glass.
• Trapezoid and triangle units with cracked glass at the narrow point. CWS makes sharp-angled geometric windows that look stunning but concentrate frame pressure at the tightest corner. When the building settles, even a quarter-inch shift puts stress right at that point. We’ve replaced more than a few CWS trapezoid lites in Miami Shores where the crack started exactly at the acute angle and spidered out. We replace the insulated glass unit with a properly tempered option when the window sits low or near a door, and we shim the frame before re-setting so it doesn’t happen again.
• Oversized CWS picture windows bowing in the middle. On wide CWS fixed units, the frame rail can deflect under the weight of impact glass, especially if the original install didn’t include enough mullion reinforcement. In Miami Shores, homes built from the 1950s through the 1970s often have openings that were never designed for the weight of modern laminated glass. We reinforce the mullions or add intermediate supports rated for the glass load, then re-level the entire unit. This is a frame problem, not a glass problem, and swapping the pane alone won’t fix it.
• Geometric operating windows that bind after hurricane season. CWS does make operable units in non-rectangular shapes, and after a heavy summer of heat and humidity, the frame material can swell just enough that the sash won’t close flush. It’s common enough that we keep shims, replacement rollers, and weather-stripping on the truck for CWS job calls in Miami Shores. We’ll adjust the hardware, replace worn rollers, and re-align the sash so it closes square and seals tight.
• Frame corrosion at the weep holes on older CWS impact units near the water. Miami Shores isn’t beachfront, but we’re close enough to Biscayne Bay that salt in the air accelerates corrosion on aluminum frames if weep holes get clogged and water sits. We see it on CWS units that were installed ten-plus years ago without routine maintenance. Our fix: clear the weeps, wire-brush the corroded area, apply an etch primer, and repaint with a factory-matched finish. If the corrosion has eaten through the frame wall, we recommend replacement over patchwork.

Our CWS Custom & Geometric Windows Process

Here’s how a CWS job goes with us, from first call to final walkthrough:

1. 1
   Call and talk to a live person. You reach us directly at (727) 483-7883, day or night. We ask about the window shape, the problem you’re seeing, and when it started. Then we set a time to come look.
2. 2
   On-site measurement and diagnostics. We measure every leg of the geometric shape, check the frame for square, and identify the actual failure point, not just the symptom. On CWS radius work, that means checking the springline, the glazing bead, and the setting blocks.
3. 3
   Parts decision: OEM vs. aftermarket. Some CWS parts are only worth buying from CWS, like proprietary clips or specific roller assemblies. For glass packs, we often use a local fabricator who matches CWS specs at a better price and faster lead time. We’ll walk you through the trade-off in plain English before we order anything.
4. 4
   The repair or replacement. We pull the old unit, prep the opening, correct any framing issues, and set the new window level and square. Every custom geometric window gets fresh flashing and sealant, no shortcuts.
5. 5
   Water test and operation check. We spray the exterior, check for leaks from inside, run the window through its full range if it’s operable, and make sure the seal lines are clean.
6. 6
   Cleanup and the Done Right Promise. We haul away the old unit and leave the opening clean. If anything isn’t right, we come back. That’s the Done Right Promise: if it’s not done right, we make it right. Period.

What CWS Custom & Geometric Windows Costs in Miami Shores

Here’s honest pricing for the CWS work we do most often in Miami Shores, based on jobs we’ve completed in the area:

• Seal failure on a CWS arch or radius sash: $400 to $900 per unit, including removal, re-bedding, and re-installation.
• Glass replacement on a CWS trapezoid or triangle unit: $600 to $1,600 depending on glass type (tempered vs. laminated impact) and size.
• Frame reinforcement on an oversized CWS picture window: $800 to $2,000, depending on how many mullions need support and whether interior trim has to be removed.
• Hardware adjustment and weather-stripping on a CWS geometric operable window: $250 to $600.
• Full custom CWS replacement with impact-rated laminated glass: $2,500 to $9,000 or more, driven by shape complexity, glass package, and whether we need engineering for the opening.

What moves the price: the number of angles, whether the glass needs tempering, whether the frame needs reinforcement, and how hard the window is to access. We give you a written, line-item quote before we start, and it doesn’t change unless you change the scope. Call (727) 483-7883 and we’ll come measure and price it precisely. Estimates are free, and there’s no trip charge inside our home county.

Why Miami Shores Homeowners Call Winslow Windows & Doors for CWS Work

We’ve been doing this since 2011, and Ed Winslow’s name is on the door and on every job we do. That’s not marketing language. It’s a fact, and it changes how we work. We answer the phone live, around the clock, because a window that’s compromised in June is not a problem you can sit on. Every technician who shows up at your Miami Shores home is background-checked and in uniform, so you know exactly who’s at your door before the truck pulls up.

We’re an independent CWS service provider, not a factory warranty center, which means we tell you when OEM parts matter and when a quality aftermarket option saves you real money. And if your CWS window turns out to be beyond saving, we install seven other premium brands: PGT, CGI, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru. You’ll get a straight recommendation, not a sales pitch for whatever’s on the truck. My name’s on it, so it’s going to be done right.

FAQs