Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterArched & Curved Windows in Miami Shores, FL
Arched and curved windows in Miami Shores typically run between $850 and $3,200 per unit installed, depending on size, glass type, and whether the opening needs structural modification. Most jobs are completed in one to two days, and every window we install is impact-rated to meet Miami-Dade County’s wind-load requirements. If you’re ready to get a number, call (727) 483-7883 – someone picks up every time, around the clock.
Miami Shores is one of the few neighborhoods in South Florida where architectural character is genuinely protected. The bungalows, Mediterranean revivals, and mid-century homes along NE 10th Avenue and the streets flanking the Village Center weren’t built with square windows in mind. Arched transoms, half-moon clerestories, and curved picture windows are structural decisions baked into these homes’ DNA. When one of those openings fails – seal breaks, frame corrodes, glass fogs – a standard rectangular replacement won’t cut it. You need a fabricator and installer who can deliver our Custom & Geometric Windows services, source impact-rated curved glass, and make sure the finished unit matches the original profile closely enough to satisfy both your eye and the Miami Shores Village building department.
That’s the work we do at Winslow Windows & Doors. Ed Winslow started this company in 2011, and we’ve been handling non-standard window geometry across Miami-Dade ever since. This specific service sits under our broader Custom & Geometric Windows in Miami Shores offering – if you have other shaped openings on the same property, that page covers the full picture. But if arched or curved windows are the specific project, you’re in the right place.
When You Need Arched & Curved Windows
- Your existing arched window is fogged, cracked, or leaking. In Miami Shores, the combination of salt air from Biscayne Bay and intense UV exposure accelerates seal failure on older insulated units. Once moisture gets between the panes, the glass won’t clear – the unit needs to be replaced, not cleaned.
- You’re upgrading to impact glass and your current arch isn’t rated. Miami-Dade has some of the strictest wind-load codes in the country. Many homes in the Shores still have original single-pane arched windows that won’t pass a product approval review. Replacing them with an impact-rated curved unit resolves the code gap and closes the insurance conversation at the same time.
- You’re restoring or renovating a historic-style home. Several blocks in Miami Shores fall under the Village’s design review guidelines. A generic replacement that changes the arch radius or profile can trigger a variance request. We measure, document, and fabricate to match existing geometry so the new unit looks like it was always there.
- A new addition or remodel requires a custom arched opening. If your contractor has framed an arched or radius opening as part of a new build or addition, it needs a window made to those exact dimensions – not a standard unit forced into the space with trim to hide the gaps.
- Your current unit is aluminum-framed and you’re switching to vinyl or fiberglass. Aluminum corrodes in coastal environments, and many older curved windows in Miami Shores were framed in aluminum. Switching to a fiberglass-framed impact unit – such as those available through ES Windows – improves durability and energy performance without sacrificing the architectural line.
- You’re updating a sunroom or Florida room with curved glass panels. Several Miami Shores properties from the 1940s and 1950s have curved-corner sunrooms where the glazing follows the wall radius. These are among the more complex replacements we handle, and they almost always require field measurement and custom fabrication.
Our Arched & Curved Windows Process
- Site visit and geometry documentation. We come out to Miami Shores, measure the rough opening in multiple planes, and photograph the existing frame and surrounding masonry or wood framing. For true arched windows, we record the rise, chord width, and radius of the arch. For curved or radius windows, we capture the horizontal sweep angle. These numbers drive the fabrication order – there’s no guessing, no “close enough.”
- Product selection and impact compliance review. We walk you through glass and frame options that carry Miami-Dade Notice of Acceptance (NOA) numbers for your wind zone. For residential arched replacements in Miami Shores, we frequently specify units from ECO Window Systems and ES Windows, both of which offer custom-radius fabrication with certified impact glazing. We confirm the selected unit meets your HOA or Village design review requirements before anything is ordered.
- Permit application. Arched window replacements in Miami Shores require a permit through Miami-Dade County building services, and the permit application must reference the window’s NOA number. We handle the paperwork. You don’t need to visit a permitting office or track down product approval documents.
- Fabrication lead time coordination. Custom curved and arched windows are not stock items. Lead times from our authorized fabricators typically run three to six weeks depending on glass type and complexity. We give you a realistic timeline upfront and follow up when the units ship so you’re not left wondering.
- Removal and installation. Our background-checked, uniformed crew removes the existing unit carefully – this matters in older Miami Shores masonry homes where the surrounding stucco or decorative surround is part of the architecture. We set the new unit, seal it to Miami-Dade standards, test the operation (if operable), and clean the glass and surrounding area before we leave.
- Inspection and close-out. We schedule and pass the required county inspection. You receive a copy of the closed permit, the window’s NOA documentation, and the paperwork for our Done Right Promise. If anything about the installation isn’t right, we come back and make it right – period. That’s not a slogan; it’s the standard Ed holds every job to.
Arched & Curved Windows Pricing in Miami Shores
Arched and curved window replacement in Miami Shores costs more than a straight rectangular swap, and there are real reasons for that. The glass has to be cut to a non-standard shape or bent to a specific radius, the frame profile has to match the curve, and the installation often involves working around decorative surrounds or masonry arches that need to be treated carefully. Here’s what we see in practice:
| Window Type | Typical Installed Cost Range |
|---|---|
| Fixed arch (half-round or elliptical), up to 36″ wide | $850 – $1,400 |
| Fixed arch (half-round or elliptical), 36″ – 60″ wide | $1,300 – $2,100 |
| Eyebrow or low-rise arch, fixed | $900 – $1,600 |
| Operable arched casement or awning (where geometry allows) | $1,500 – $2,600 |
| True radius / curved-corner unit (sunroom, bay) | $1,800 – $3,200+ |
| Impact glass upgrade (included in above ranges for Miami Shores) | Included – required by code |
| Permit fee (Miami-Dade County) | $75 – $250 depending on valuation |
A few things that push a job toward the higher end of these ranges: significant rise-to-chord ratio (a very “full” arch costs more to fabricate than a shallow one), structural masonry work required around the opening, Oversized Openings with specialty glass coatings like low-E with argon, and jobs where the exterior decorative surround needs to be reproduced or repaired. On the lower end, you’ll find smaller fixed arches in good structural openings where the frame swap is clean.
Seniors and veterans receive a permanent 10% discount on any job. For repairs that come in over $200, we take $40 off automatically. There’s no trip charge for work inside Miami-Dade County. If you’ve already got a written estimate from another company, we’ll give you a free second opinion – no pressure, just a straight comparison so you can decide with full information.
Call (727) 483-7883 for a free on-site estimate. We’ll measure the opening, confirm what’s possible given your specific window type, and give you a written number before any work starts. Upfront pricing – no surprises on the invoice.
Why Miami Shores Homeowners Call Winslow
Miami Shores is a small Village – roughly 10,500 residents in about two square miles – and word travels fast when a contractor does good work or bad. Ed Winslow has been doing this work in South Florida since 2011, and his name is on every job we complete in the area. That’s not a marketing line; it’s the practical reality of running a locally owned operation where the owner is reachable.
The homes here are architecturally distinct. The Village has design review standards that matter to residents, and a lot of the housing stock predates modern building codes by 40 to 70 years. That means arched and curved window replacement here requires more care than it does in a newer subdivision. The masonry surrounds need to stay intact. The arch profiles need to match. The permits need to close cleanly so there’s no open permit dragging on a title when you go to sell.
We’ve handled curved window jobs on the tree-lined streets north of the Village Center, on the canal-facing properties closer to the bay, and on homes along Biscayne Boulevard where the salt exposure is measurably worse than a mile inland. Each situation is a little different. We take field measurements rather than relying on nominal sizes, and we don’t order until we’re confident the fabricated unit will fit.
Every technician who comes to your Miami Shores home is background-checked and arrives in a Winslow uniform. You’ll know who’s coming before the truck pulls up. Someone answers our phone 24 hours a day, seven days a week – not a voicemail system, not a callback queue, an actual person. If something comes up after the job is done, that’s still true.
The Done Right Promise backs every installation. If the work isn’t right, we make it right. That standard applies to arched windows the same way it applies to every other service we offer across Winslow Windows & Doors. A century of accountability is a long time to stand behind something – which is exactly why we make sure the job is done correctly the first time.
FAQs – Arched & Curved Windows in Miami Shores
Can arched windows be impact-rated for Miami-Dade County requirements?
Yes, impact-rated arched windows are available and required for Miami Shores replacements. Manufacturers like ECO Window Systems and ES Windows fabricate Custom Impact Windows in custom-radius and half-round units with laminated impact glass that carry Miami-Dade Notice of Acceptance numbers. The NOA confirms the unit meets the wind-load and debris-impact standards for this wind zone. We verify the specific product approval before ordering and include the documentation in your permit package. Call (727) 483-7883 for a free estimate – we’ll confirm which products apply to your specific opening.
How long does a custom arched window replacement take from start to finish?
From the initial measurement visit to the final county inspection, most arched window replacements in Miami Shores take five to eight weeks. The installation itself is one to two days. The bulk of the timeline is fabrication lead time (typically three to six weeks for a custom curved unit) and permit processing with Miami-Dade County. We give you a realistic schedule on day one so you’re not caught off guard. If your situation is more urgent, call us and we’ll check current lead times with our fabricators – they can sometimes expedite.
Will a replacement arched window match my existing opening in a historic Miami Shores home?
In most cases, yes – with careful measurement and the right fabricator. We document the arch radius, rise, chord width, and exterior profile before ordering anything. For homes with decorative masonry surrounds or exterior keystones, we work around those elements rather than removing them. What we can’t always replicate exactly is the original divided-lite pattern if your home has true muntins (as opposed to simulated grilles), but we can get very close visually. If your home falls under Miami Shores Village design review, we factor those guidelines into product selection from the start.
Is it cheaper to repair an arched window or replace it?
Repair is cheaper when the frame is structurally sound and the problem is limited to a failed seal or a single cracked pane. Seal failure on a fixed arched unit can sometimes be addressed by replacing the insulated glass unit (IGU) without touching the frame, which runs less than a full replacement. But if the frame has corroded (common with aluminum-framed windows near Biscayne Bay), if the glass is impact-non-compliant, or if the window is single-pane, replacement is the smarter investment – both for code compliance and long-term performance. We’ll give you an honest read on which route makes sense at the free estimate, and we won’t push replacement if repair is the right call. Call (727) 483-7883 to schedule a look.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Miami Shores since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.