Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Shingle, Tile & Metal Roofing Across Pompano Beach
Shingle, tile, and metal roof replacement in Pompano Beach runs $12,000 to $45,000 for a typical single-family home, and the number that matters more than the bid is whether the system carries a Miami-Dade Notice of Acceptance. Pompano Beach sits entirely inside Broward County’s High-Velocity Hurricane Zone, one of only two counties in the country with that designation. That means products legally sold in most of Florida cannot be installed here. We’ve replaced and repaired roofing across Pompano Beach’s beachside condos, Garden Isles tract homes, and the CBS neighborhoods west of Federal Highway long enough to know exactly what the code officer will check. Call (727) 483-7883 and we’ll walk your roof with you, measurement tape in hand, and give you a written line-item quote before we leave the driveway.

Why Winslow Windows & Doors Is Pompano Beach’s Preferred Shingle, Tile & Metal Roofing Company
Ed Winslow put his name on this business in 2011, and that changes how a roofing crew behaves when a Pompano Beach homeowner is watching from the sidewalk. We’re not a faceless call center that dispatches whoever’s available. Every technician who shows up is background-checked, uniformed, and accountable to the owner himself. Our Pompano Beach customers have come to expect specific things: a live person answers the phone at 2 a.m., the estimate matches the invoice, and if something isn’t done right, Ed makes it right. That last part isn’t a slogan. It’s the Done Right Promise, and we’ve been standing behind it for over 15 years.
We also know Pompano Beach’s building department, its permit windows, and the way Broward County wind-mitigation inspectors want decking refastened. That local knowledge means fewer rejected inspections and faster closeout. When a homeowner in the Harbor Village area needs a roof done before an HOA deadline, we know how to sequence the permit, the tear-off, and the inspection so the association stays quiet and the job stays moving.
Our Shingle, Tile & Metal Roofing Services in Pompano Beach
Asphalt Shingle Roof Replacement
Asphalt shingle remains the most common roof on Pompano Beach’s 1950s to 1970s CBS tract homes, and it fails here in predictable ways: granule loss on the gable ends, delamination from wind-driven rain, and lifted tabs along the eave overhangs during hurricane season. We install HVHZ-compliant shingle systems with high-temperature peel-and-stick underlayment, secondary water barrier at all eaves, and Miami-Dade NOA fastener patterns. A typical shingle tear-off and replacement on a 1,600-square-foot Pompano Beach ranch runs $12,000 to $18,000 depending on decking condition.

Concrete and Clay Tile Roofing
The 1960s beachfront condo towers along A1A and the mid-rise buildings west of the Intracoastal frequently carry original concrete tile roofs, and those tiles are now hitting the end of their service life. Unreinforced concrete tile cracks along the eave overhangs under repeated hurricane uplift, and once the underlayment beneath it degrades, leaks start. Tile replacement on a Pompano Beach condo building or single-family CBS home requires Miami-Dade NOA tile profiles and uplift-rated clips, not the commodity product sold inland. Budget $18,000 to $40,000 for a full tile roof on a typical Pompano Beach home, and more on condo towers where staging and hoisting control the schedule.

Standing-Seam and Corrugated Metal Roofing
Metal roofing performs well in Pompano Beach if you choose the right alloy and the right clip. Standard galvanized roofing fails within 3 to 5 years east of Federal Highway because Atlantic salt spray eats fasteners and panel clips, and that leads to panel blow-off in high design-pressure zones. We install HVHZ-rated standing-seam systems from CWS with stainless fasteners and Miami-Dade NOA details. A standing-seam metal roof on a Pompano Beach home runs $22,000 to $45,000 depending on roof complexity, seam profile, and whether we’re tearing off the existing shingle or tile first.

Roof Repair and Storm Damage Response
Not every Pompano Beach roof problem requires a full replacement. We repair lifted shingles, cracked tile, corroded metal panels, and failed flashing at parapet walls and chimneys. After a storm rolls through northeast Broward, we’re often the first call for homeowners off Atlantic Boulevard and McNab Road who need a tarp, a documented inspection, and a repair quote their insurer will accept. Repair pricing depends on what we find, but a typical flashing or shingle repair in Pompano Beach runs $400 to $1,200, and we stand behind every repair with the same Done Right Promise.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pompano Beach
As an authorized installer for elite roofing and exterior brands, we work with products that actually carry Miami-Dade NOA approvals for Pompano Beach’s HVHZ wind zone. That includes CWS metal roofing systems, plus the impact-resistant window and door lines from ECO Window Systems and Mr-Glass that often accompany a full exterior protection job. We don’t stock shelves of generic parts. We order the specific NOA-approved profiles, clips, and underlayments each Pompano Beach job requires, and because we’ve been doing this since 2011, our suppliers prioritize us when a storm season rush hits. You’re never waiting on a mystery brand from a big-box shelf.
Common Shingle, Tile & Metal Roofing Problems We See in Pompano Beach Homes
- Concrete tile cracking at eave overhangs. Unreinforced tile from the 1960s and 70s cracks under repeated hurricane wind uplift, especially on the CBS homes east of Federal Highway where salt spray has also eaten the clips. We see this most often on single-story ranches in Garden Isles and the neighborhoods around McNab Road.
- Galvanized fastener corrosion on metal roofs. Direct Atlantic salt spray eats standard galvanized roofing fasteners and clips within a few years, causing panel blow-off in the high design-pressure zones near the beach. The fix is stainless or aluminum fasteners matched to a Miami-Dade NOA detail.
- Shingle delamination from wind-driven rain. Pompano Beach’s position on the Atlantic means storms drive rain horizontally into gable ends, and original single-pane jalousie windows often fail HVHZ air-infiltration standards at the same time. Shingle tabs lift, granules wash off, and water finds the decking.
- Salt pitting on aluminum drip edge and flashing. East of US-1, aluminum flashing and drip edge pit within a few years, and that corrosion opens the roof system to water intrusion at the eaves and rakes. We replace with heavier-gauge, salt-rated material that meets HVHZ requirements.
Pricing for Shingle, Tile & Metal Roofing in Pompano Beach, FL
A shingle roof on a typical Pompano Beach home runs $12,000 to $18,000. Concrete or clay tile runs $18,000 to $40,000. Standing-seam metal runs $22,000 to $45,000. The spread depends on roof size, tear-off count, decking condition after decades of salt exposure, and whether the property is a single-story CBS ranch or a multi-story condo tower requiring staging. What separates a compliant Pompano Beach quote from a cheap one is line-item detail: NOA product numbers, refasten schedules per Miami-Dade details, secondary water barrier at eaves, and the wind-mitigation inspection that follows. Cheap quotes leave those out because they cost money. Ours doesn’t. Call (727) 483-7883 for a free in-home measure and written quote.
We Also Serve Cities Near Pompano Beach
If you’re in Fort Lauderdale, Hollywood, North Miami Beach, or Miami Gardens, you’re still minutes from the same crews and same standards we bring to Pompano Beach. Our full Shingle, Tile & Metal Roofing service area covers northeast Broward and the edge of Miami-Dade, so a quick call to (727) 483-7883 gets the same free estimate no matter which side of the county line you’re on.

Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Shingle, Tile & Metal Roofing in Pompano Beach
You need a Miami-Dade Notice of Acceptance for every roof system installed in Pompano Beach, because the city falls entirely inside Broward County’s High-Velocity Hurricane Zone. A Florida Product Approval alone is not enough here, even though it’s sufficient in Palm Beach County and much of the rest of the state. Your quote should list the specific NOA number for every shingle, underlayment, and fastener system. Call (727) 483-7883 and we’ll show you the NOAs before you sign.
Metal roofs east of US-1 in Pompano Beach must be engineered for the wind speeds and design pressures called out in the HVHZ portion of the Florida Building Code, which exceed inland requirements significantly, with specific uplift ratings matched to the roof zone and building height. A compliant standing-seam system will show calculated pressures per zone on the plans, not a generic brochure number. Bring us your roof and we’ll spec it properly.
Milestone inspections in Broward County now force condo associations on A1A to document the structural and waterproofing condition of their buildings, and a failing original tile roof is one of the first items flagged. Replacement requires a Miami-Dade NOA tile profile, staging that doesn’t displace residents, and paperwork the association’s engineer will accept. Winslow has coordinated bulk permitting and phased roof replacement on Pompano Beach condo towers, and we know what the inspector wants to see. Call (727) 483-7883 and we’ll meet with your board.
Yes, a new HVHZ-compliant roof with documentation can qualify you for a windstorm premium credit, but the insurer only honors it if the wind-mitigation inspection form and permit closeout paperwork match. We stage each Pompano Beach roof project through the Broward County inspection sequence so the Uniform Mitigation Verification Inspection has the documentation it needs. The actual discount comes from your carrier, not from us, but we make sure the paperwork is clean.
The cheap quote omits the line items that make a Pompano Beach roof legal: the Miami-Dade NOA product numbers, the refasten schedule per NOA details, secondary water barrier at eaves, and the wind-mitigation inspection. The compliant quote lists all of them. If a bid doesn’t mention NOA numbers, walk away. Call (727) 483-7883 for a written quote that will pass the first inspection.
What Shingle, Tile & Metal Roofing Costs in Pompano Beach
Here’s the honest spread for Pompano Beach roofing work in 2026. A full shingle roof on a typical CBS ranch runs $12,000 to $18,000. Tile runs $18,000 to $40,000. Standing-seam metal runs $22,000 to $45,000. What moves the price? Opening count and roof complexity, wind zone (east of US-1 is a different design than west of Dixie), floor height on condo towers, and whether the existing decking survived decades of salt air or needs refastening. Frame material matters less than most people think. What matters more is whether the roofer is priced for the inspections Pompano Beach actually requires. We include the NOA documentation, the refasten schedule, and the wind-mitigation closeout in every quote. Call (727) 483-7883 and we’ll come measure the roof for free.
Florida Pays You Back
Pompano Beach homeowners have access to incentive programs that reduce the real cost of a compliant roof. My Safe Florida Home matching grants can cover up to $10,000 of qualifying wind-mitigation upgrades for approved applicants. Florida also exempts impact-resistant exterior products from sales tax in certain qualifying configurations, and the federal 25C energy credit can return up to $600 annually on qualifying units. Then there’s the windstorm premium credit, which averages around a 25% reduction on the windstorm portion of your policy after a documented wind-mitigation inspection, typically $75 to $150. We don’t guarantee any of these numbers, the programs and your carrier set the final figures, but we’ll give you the documentation each one requires. One comparison worth making before you decide: a permanently installed impact-rated roofing and opening system is passive protection, no panels to hang at 2 a.m. while a hurricane warning is live, versus hurricane shutters, which require someone to be home, awake, and physically able to install them every single time. In Pompano Beach’s HVHZ, permanent protection is not a luxury, it’s how the code reads.
On a 1960s CBS tract home east of US-1 in Garden Isles, our crew replaced a corroded original asphalt shingle roof with an HVHZ-compliant standing-seam metal system from CWS. The old decking had lost fastener grip from decades of salt pitting, so we refastened to the concrete block per Miami-Dade NOA details, installed a high-temperature peel-and-stick underlayment, and added secondary water barrier at every eave. Then we staged the project through Broward County’s wind-mitigation inspection so the homeowner’s insurer would issue the 627.0629 premium credit. That’s the full sequence, and that’s what a Pompano Beach roof replacement looks like when it’s done correctly.
Because Pompano Beach falls entirely within Broward County’s High-Velocity Hurricane Zone, every roof replacement, whether shingle, tile, or metal, must meet Miami-Dade NOA product approval and pass wind-load design pressures stricter than neighboring Palm Beach County. Many roofing materials legally sold elsewhere in Florida are disqualified here. When you compare quotes in Pompano Beach, ask one question first: where’s the NOA number? If the roofer can’t answer, you’ve found the difference between a bid and a liability.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pompano Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After