Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Shingle, Tile & Metal Roofing Across Fort Lauderdale
Replacing or repairing a roof in Fort Lauderdale means working with a company that understands HVHZ wind codes, canal-front salt exposure, and the tight lot lines that make staging a job here different from anywhere else in Florida. We replace and repair shingle, tile, and metal roofs across the city, from Coral Ridge to Tarpon River to the beachside condos along A1A. Our crew knows which materials hold up on a 1960s CBS ranch three blocks off a canal and which ones belong on a high-rise near the New River. Call (727) 483-7883 for a free estimate and a straight answer on what your roof actually needs.

Key Takeaways
- Shingle, tile, and metal roofing in Fort Lauderdale typically runs $9,500-$38,000 depending on material, roof size, and wind-zone requirements.
- Fort Lauderdale sits entirely inside the High Velocity Hurricane Zone, so every roof must meet the strictest wind codes in the country.
- Salt-laden air from 300-plus miles of inland canals corrodes fasteners and flashing faster here than almost anywhere else in Florida.
- We work tight zero-lot-line lots routinely: staged parking, neighbor notice, contained debris, and permits handled start to finish.
- Ed Winslow’s name is on the business. The Done Right Promise is our warranty in plain words: if it’s not done right, we make it right.
Why Winslow Windows & Doors Is Fort Lauderdale’s Preferred Shingle, Tile & Metal Roofing Company
Ed Winslow founded this company in 2011 and built it on one idea: a homeowner should be able to call a real person, get a straight answer, and hold someone accountable if the work falls short. That’s why our published address, license number, and the Done Right Promise sit on every estimate we write in Fort Lauderdale. If it’s not done right, we make it right. No fine print, no disappearing act.
We answer the phone 24/7. When a Fort Lauderdale homeowner calls at 10 p.m. worried about a lifted tile or a leak after a squall, a live person picks up. Not a voicemail loop, not a call center. That matters when water is finding its way into a 1950s CBS home in Edgewood and you need someone who knows what to look for.
Our technicians are background-checked and arrive in uniform. Before the truck pulls up, you know exactly who’s walking onto your property. And because we’re an authorized installer for eight premium brands, including PGT and CGI, we’re not guessing at product compatibility when we spec a metal roof retrofit or a replacement tile underlayment for a Fort Lauderdale home in the HVHZ.
Our Shingle, Tile & Metal Roofing Services in Fort Lauderdale
Fort Lauderdale’s housing stock spans 1950s Coral Ridge ranches, Tarpon River cottages on canal lots, and modern townhomes near downtown. Each one needs a different approach to Shingle, Tile & Metal Roofing, and we handle all three material families with crews who know this city’s codebook cold.
Shingle Roof Repair and Replacement in Fort Lauderdale
Architectural asphalt shingles remain the most common roof on Fort Lauderdale’s 1950s-1970s homes. The problem we see most often in neighborhoods like Edgewood and Coral Ridge isn’t shingle age, it’s fastener corrosion. Salt-laden air from inland canals accelerates nail and flashing rust, which means a perfectly good shingle can lift in a storm because the fastener beneath it failed. We spec stainless fasteners and inspect decking before any shingle goes down.

Tile Roof Repair and Replacement in Fort Lauderdale
Concrete and clay tile roofs are everywhere in Fort Lauderdale, especially on the Mediterranean-style homes built from the 1960s onward. Tile handles wind well, but Fort Lauderdale’s salt air eats at the underlayment and the metal flashing long before the tile itself fails. A tile roof that looks fine from the street can be leaking at the valley or the chimney for months. We remove, reset, and replace tile and underlayment, matching the existing profile so the repair doesn’t look like a patch.

Metal Roofing in Fort Lauderdale
Standing seam and 5V-crimp metal roofs are gaining ground in Fort Lauderdale because they shed wind-driven rain well and carry a longer service life than shingles in a salt-air environment. But metal roofing in the HVHZ demands specific panel gauges, clip spacing, and edge details to pass Broward County inspection. We install metal roofs engineered for this wind zone, not a generic spec that works in Georgia.

Roof Inspections and Storm-Damage Assessments
After any named storm or a strong afternoon thunderstorm off the Everglades, Fort Lauderdale homeowners call us to check for lifted shingles, cracked tile, and compromised flashing. We document everything with photos, write a line-item report, and tell you honestly whether you need a repair, a replacement, or just a reseal. Free second opinions on any written estimate are always available.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Lauderdale
We install and service roofs from manufacturers whose products are built for high-velocity wind zones: PGT, CGI, and Therma-Tru systems are in our authorized lineup, and we routinely work with ES Windows and ECO Window Systems on integrated roof-and-window envelope projects. Because we stock common flashing profiles, tile profiles, and underlayment types locally, Fort Lauderdale customers get faster turnaround on repairs without waiting for parts to ship from out of state. A neighbor you can call at 2 a.m., and someone will actually answer.
Common Shingle, Tile & Metal Roofing Problems We See in Fort Lauderdale Homes
- Canal-driven corrosion: Fort Lauderdale has 300-plus miles of inland canals, which means a home three miles from the beach still breathes salt-laden air. We regularly find aluminum flashing, nail heads, and drip edge oxidized to failure on homes nowhere near the ocean.
- HVHZ wind uplift on older shingle roofs: Roofs installed before Broward tightened its HVHZ enforcement often lack enough fasteners per shingle or the right drip-edge detail. In a storm, those roofs lose shingles at the eaves first, then the whole field follows.
- Tile underlayment rot at the valleys: Fort Lauderdale’s rainy season runs May through October, and a small valley leak that starts in June can rot decking by September. Tile hides this until the deck is soft underfoot.
- Zero-lot-line access complications: In neighborhoods like Tarpon River and parts of Edgewood, homes sit three to five feet from the property line. Staging a tear-off or a metal panel lift requires equipment that fits, a plan for neighbor notification, and sometimes a crane with a street permit.
Pricing for Shingle, Tile & Metal Roofing in Fort Lauderdale, FL
A full architectural shingle roof on a typical 1,800-square-foot Fort Lauderdale home runs $9,500-$16,000. Tile runs higher, usually $14,000-$38,000 depending on the tile profile and whether the underlayment needs full removal. Standing seam metal on the same footprint lands between $18,000 and $35,000. Repairs are priced by the line item: a shingle repair under 100 square feet typically runs $350-$700, a tile valley repair $450-$950. Access changes the quote. A zero-lot-line Tarpon River lot where we need a crane and a street permit costs more than a Coral Ridge home with a wide driveway and clear side yard. We give you a written, line-item quote before any work starts, and the price on that quote is the price you pay. No change orders unless you change the scope. Call (727) 483-7883 to schedule a free estimate.
What Shingle, Tile & Metal Roofing Costs in Fort Lauderdale
Here’s the honest math on what moves roofing prices in Fort Lauderdale. Roof size matters first: a 1,200-square-foot roof costs less than a 2,800-square-foot roof, no way around it. Material choice matters second. Shingles are the most affordable but carry the shortest service life in this salt-air climate. Tile lasts longer but costs more in labor because every tile is handled individually. Metal sits at the top of the price range but handles the HVHZ wind load and salt environment better than anything else long term.
Wind-zone requirements matter too. A home inspected under Broward County’s HVHZ rules may need upgraded decking, more fasteners, and specific edge details that a home in Palm Beach County might not. That’s not a markup, that’s compliance. And access on a tight Fort Lauderdale lot can add crane time and permit coordination. We’ll explain exactly what’s driving the number on your quote. Every estimate is free, in writing, and broken down line by line. Call (727) 483-7883 to schedule yours.

Working on a Tight Fort Lauderdale Lot: Staging, Permits, and Neighbor Notice
Fort Lauderdale is not a suburban sprawl city. Many homes in Coral Ridge, Edgewood, and Tarpon River sit on lots where the wall is four feet from the property line and the driveway barely fits a pickup. That reality changes how we run every roofing job here. We stage materials on the street with a permit when needed, use a crane only when the lot truly requires it, and give written notice to neighbors at least two days before a crane lift or a full tear-off. It’s not required everywhere, but it’s how we keep a constrained site clean and the neighbors onside.
On a tight Coral Ridge lot with just four feet between the home and the neighbor’s fence, our crew replaced a 1958 jalousie window with an HVHZ-rated PGT impact single-hung, scheduling the crane lift for 8:00 a.m. and giving the neighbor written notice two days prior. Because the home was a CBS block structure, we only had to cut a new opening in the stucco, keeping dust and debris contained with a wet saw and daily magnetic sweeps of the shared driveway. That’s the standard, not the exception.
Density also means permit complexity. Broward County Building Division enforces the HVHZ code with mandatory inspections, so we pull every permit, schedule every inspection, and stand with the inspector when they walk the roof. Fort Lauderdale’s overlay districts and historic review rules can add another layer depending on the neighborhood. We handle that paperwork too. Ed’s name is on the door, and on every job we do.
We Also Serve Cities Near Fort Lauderdale
Winslow Windows & Doors serves all of Broward and northern Miami-Dade, including Pompano Beach, Hollywood, North Miami Beach, and Miami Gardens. If you’re in one of those cities and need Fort Lauderdale-grade roofing work, the same crew, the same warranties, and the same 24/7 live answer apply. Dispatch and scheduling run from our Miami office, and our crews serve Fort Lauderdale locally, every day.
Why Fort Lauderdale’s HVHZ Rules Change Which Roof Gets Quoted
Fort Lauderdale sits entirely within the High Velocity Hurricane Zone, shared only with Miami-Dade County in Florida, meaning every replacement window and door must carry a Miami-Dade Notice of Acceptance, the most stringent product approval standard in the country. This requirement, enforced by Broward County Building Division with mandatory inspections, disqualifies the vast majority of products sold elsewhere in Florida, making material selection and permitting far more complex here than in Tampa, Orlando, or even northern Palm Beach County.
For roofing, that means the underlayment, fasteners, and edge details all have to meet HVHZ standards, not just the visible material. A shingle that passes code in Jacksonville can fail a Fort Lauderdale inspection. And on canal-front homes, the salt air from a canal three blocks away causes aluminum frame oxidation within five years on non-HVHZ installations done before the mandate. We quote roofs and windows to this environment from the first conversation, not after the inspection fails.
Florida Pays You Back
Fort Lauderdale homeowners have several ways to recover part of the cost of a new roof or impact-rated upgrade. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation improvements, and a new HVHZ-compliant roof is often a qualifying item. Florida also exempts impact-resistant windows and doors from sales tax, which saves real money on a whole-home envelope project. The federal 25C energy credit can return 30% of product cost, up to $600 per year, on qualifying units. And after a wind-mitigation inspection, typically $75-$150, many Fort Lauderdale homeowners see windstorm-premium credits averaging around 25% on the windstorm portion of their policy. We don’t set the program rules and we won’t guarantee a specific rebate, but we’ll help you document the work so you can apply with confidence.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Shingle, Tile & Metal Roofing in Fort Lauderdale
No. Fort Lauderdale is entirely inside the HVHZ, and Broward County requires every replacement window to carry a Miami-Dade NOA, regardless of whether shutters are present. Shutters do not substitute for impact-rated glazing under the current code. If you have older windows and working shutters, you can keep them, but the moment you replace a window, it must be impact-rated. Call (727) 483-7883 and we’ll confirm what applies to your specific home.
No. Jalousie windows, the louvered aluminum crank-out style common in 1950s-60s Fort Lauderdale homes, are by design impossible to make impact-compliant. Film cannot convert a jalousie into an HVHZ-rated assembly, and Broward wind-mitigation inspectors flag them immediately. Insurance carriers increasingly require their removal. Jalousie-to-impact-window conversion is one of the most common jobs we do in older Coral Ridge and Edgewood neighborhoods. Call (727) 483-7883 for a free estimate on replacing yours.
Salt air from Fort Lauderdale’s 300-plus miles of inland canals accelerates aluminum frame oxidation and seal failure on non-HVHZ windows, even on properties miles from the Atlantic. We recommend frames and finishes rated for marine exposure, which typically means premium aluminum with a coastal-grade coating or vinyl in applications where the design pressure allows. We’ll spec the right frame for your home’s distance from salt water. Call (727) 483-7883 for a straight recommendation.
Because access drives labor. On a zero-lot-line Tarpon River lot where the neighboring wall blocks the required anchoring depth, the window often needs larger tempered glass and a more complex anchoring detail to meet the required design pressure. That can push a single opening into the $1,500-$1,800 range where the same window on a suburban lot might run $900-$1,100. We’ll show you the line-item difference on the written quote. Free estimates at (727) 483-7883.
Yes, because Fort Lauderdale and Miami-Dade share the same HVHZ standard. A Miami-Dade NOA product installed in Fort Lauderdale meets the same approval standard that a Miami-Dade home requires, so wind-mitigation credits apply the same way. Your insurer sets the final credit amount after a wind-mitigation inspection, but the product standard is identical. We’ll provide the NOA documentation with your invoice. Call (727) 483-7883 with questions.
Why Fort Lauderdale Homeowners Choose Winslow for Roofing
Impact-rated. Energy-certified. Done right the first time, or we come back. That’s the promise behind every roof we install in Fort Lauderdale. We’re the one down the road, not a national chain with a ticket number. Our standing offers apply to every job in Fort Lauderdale: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the home county, and a permanent 10% discount for seniors and veterans. Upfront pricing. No surprises on the invoice. Call (727) 483-7883 today and talk to a real person who knows Fort Lauderdale roofing.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Fort Lauderdale and all of Broward County since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After